loader image

Motion Sensor

PIR motion Sensor reacts to the temperature change (heat energy) caused by the movement of human body. It requires an unobstructed line-of-sight for accurate detection, if there is an obstruction, such as furniture or partition between the person and the detector, the person cannot be detected.

In general, PIR sensor responds to larger movements (i.e walking) and is less influenced by the air flow interruption which makes it works optimally in the spaces with high air flow and frequent occupant’s movement but without having high ambient temperature.

The product is a new saving-energy switch; it adopts microwave sensor mould with high-frequency electromagnetic wave.and integrated circuit. It gathers automatism, convenience, safety, saving-energy and practical functions. The wide detection field depends on detectors. It works by receiving human motion.-When one enters the detection field, it can start the load at once and identify automatically day and night. Its installation is very convenient and its using is very wide. Detection is possible to go through doors, panes of glass or thin walls.

Micowave Motion Sensor

  • Power Sourcing : 220 -240V/AC
  • Power Frequency : 50/60Hz
  • Ambient Light : < 3 – 2000LUX (Adjustable)
  • HF System : 5.8 GHz CW radar, ISM band
  • Time Delay : Min. 10sec ± 3sec, Max.12min ± 1min
  • Rated Load : 1200W , 300W
  • Detection Range : 360°/180°
  • Detection Distance : Wall: 5-15m [Adjustable], Ceiling: 1-8m (radius) [Adjustable]
  • Transmission Power : < 0.2mW
  • Installing Height : Wall 1.5-3.5m, Ceiling: 2-8m
  • Power Consumption : Approx 0.9W
  • Detection Motion Speed : 0.6 – 1.5m/s